5.5 - Socket

Setting up a Socket method printers

Useful For:  Receipt Printing

Limitations: Simply telnets to the printer and sends the data. No printer drivers are actually used.

Install the printer

Since no printer drivers are actually used, there is no ‘installation’ part to this print method.

 

Set up the printer in Convention Master

  1. To intall the cups printers in convention master access your convention master console by browsing to http://10.10.2.10/console/
  1. Click on “Admin – Printing” then “Manage Printers

Manage Printers Screen

  1. In the upper left of the manage printer screen you can add your printer. If this is not the first printer you have set up, you may need to click the “Add Printer” button first. Then set the following settings:  Do this by setting the following:
    1. Printer Name – This is the name you want to assign the printer.
    2. Method – Choose Socket
    3. Path – <IP>:<Port>:<Type> where Ip is the ip address of your Ethernet printer and port is the port number that printer is listening on. Type can be either esc-pos for Epson styule printers, or text for plain-text printers.
  1. Click Add
  2. Once set up you should see your entries in the Printers table and they should look like this:

Socket printing

Test the printer

To test the printer functionality, add the printer to a printer pool and then use the Pool testing section. Read the Setting up printer pools section of this manual to perform the tests.